All Products

5/16 BSW coach-bolt with square nut. These were used to bolt the sides of the wings to the stay brackets. Also, to bolt the under-wing mesh to the...

5/8 inch bore master-cylinder body, plunger and end cap. Needs reconditioning + push-rod assembly (and a new repair kit) to complete. These cylinders...

5/8" plunger for master cylinder (1947-51). For earlier ACs (1947-51) with the hydro-mechanical braking system. This is a new component.

Jacking point rubber bung. Re-manufactured rubber bung for the AC's jacking points. Note that many ACs had the heads of these bungs painted the same...

A pair of Wipac 118/7 head lamps. In working order but need a little bit of restoration. The leads have been cut on one of the lamps. The bulb holder...

A side plate for a front spring slipper. Zinc-plated. Secondhand.

Air filter labels. Reproduction labels for the Smiths air filters. These are usually fixed to the backs of the filters, although sometimes they...

Air filter set. Second-hand set of Smith's air filters complete with clamps. They need a cosmetic restoration if you want a smart and clean engine...

Aluminium figure-of-eight gaskets for cylinder liners. These were normally used in conjunction with separate halite and paper gaskets, permitting the...