Displaying 1 to 9 (of 15 Products)

Brass screws set for fuel gauge sender.

Brass screws set for fuel gauge sender. These are one of the more rare sizes of BA screws: 3BA. Steel versions of these were used to secure the fuel...

£1.80

Add:

Fastener set for the radiator grill.

Fastener set for the radiator grill. The top of the radiator grill was originally held with a pair of 4BA screws, screwed into aircraft style...

£8.80

Add:

Set of 8 screws for the steering wheel. 6 (rusty!) nuts included.

Set of 8 screws for the steering wheel. 6 (rusty!) nuts included. In need of restoration/plating. 1/4 BSF thread. These have a smaller head diameter...

£5.00

Add:

Special nut and washer set for brake expanders.

Special nut and washer set for brake expanders. These are for mechanical rear brakes as fitted to ACs from 1947 to early 1951. They secure the brake...

£20.00

Add:

2BA Nyloc Nut (stainless).

2BA Nyloc Nut (stainless) These can be used for securing the accelerator brackets and accelerator spring, to the bulkhead. The original nuts had...

£1.25

Add:

5/16 BSW coach-bolt with square nut.

5/16 BSW coach-bolt with square nut. These were used to bolt the sides of the wings to the stay brackets. Also, to bolt the under-wing mesh to the...

£2.10

Add:

Bolt for rear springs.

Bolt for rear springs. 7/16 BSF x 3.5 inches high tensile bolt (self colour) supplied with zinc-plated nyloc nut. These were used to bolt the rear...

£1.80

Add:

Screw (stainless) for bulkhead and horn panel.

Screw (stainless) for bulkhead and horn panel. 2BA x 1" round-head machine screw, stainless steel (grade A2/304). The originals were mild steel. They...

£0.20

Add:

Screw (stainless) for floor panel.

Screw (stainless) for floor panel. 2BA x 3/4" countersunk machine screw, stainless steel (grade A2/304). These are used to screw the front floor...

£0.30

Add:

Displaying 1 to 9 (of 15 Products)